British Astronomical Association

Supporting amateur astronomers since 1890

VISUAL SPEC and windowes 10

› Forums › Spectroscopy › VISUAL SPEC and windowes 10

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 21 February 2017 at 12:11 am #573702
    Peter Taylor
    Participant

    Hi All,     I cannot get visual spec 3.8.8 to run properly and cannot up grade to 4.2.6 in windows 10 is there a way to get it going.

    peter

     

    21 February 2017 at 12:08 pm #577962
    owen brazell
    Participant

    I had the same issue but if you following th einstructions on the downlaod page under warning 5 and run as admin then it works.

    Owen

    21 February 2017 at 12:41 pm #577963
    Robin Leadbeater
    Participant

    Also some additional comments here which might be useful where a change to 256 colours was needed

    http://www.spectro-aras.com/forum/viewtopic.php?f=8&t=1660

    Robin

    21 February 2017 at 9:05 pm #577964
    Peter Taylor
    Participant

    Dune as you suggested, it is a bit better but has no colour on spectra lines, docent dived just puts a street line, any ideas  or do I try and install it again.   

    peter  

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.